Why does HiRO 802.11n wireless adapter still connect to my wireless N router at only 54Mbps(802.11g mode)?
Via 802.11n protocol, Our H50191 is designed to achieve the maximum speed of 300 Mbps,
while H50193 & H50194 can get up to 150Mbps.
Current wireless routers should be designed in “regular”
802.11n mode.However, please make sure
that your 802.11n router is not using the older “draft-N” mode, which sometimes
can result in communication problem between wireless network card and router
and may result in the connection speed of 54Mbps (802.11g mode). In addition, due to the router’s MIMO design &
the configuration of antenna (it may be running 1x transmit, and 1x receive as
there are only 2 antenna shown), it may be more common to see your connection
For either scenario above, you may need to contact your router's manufacturer for more support.
After resolving the issues mentioned above, if the connection speed is still at
54Mbps (802.11g mode), please go into your router setup and change the
following security protocols:
security mode from WPA-Personal toWPA-or WPA2-Personal
2.Change the cipher
type from TKIP toTKIP and AES
Save the setup into your router.You may need to restart the computer
Copyright (C) 2013 Hiro Inc. All Rights Reserved.
All company and/or product names may be trade names,
trademarks and/or registered trademarks of the respective
owners with which they
are associated. Features, pricing, availability, and specifications are subject to change without notice.