HiRO DSL ADSL DSL2+ ADSL2+ Modem w/ 4 Port Router and 802.11b/g Wireless Router

ADSL COMPLIANCE

• Full-rate ANSI T1.413 Issue 2
• ITU G.992.1 (G.dmt) Annex A or B
• Splitterless ITU G.992.2 (G.lite) specification
• ITU G.994.1 (G.hs)
• ITU G.992.3 (G.dmt.bis / ADSL2)
• ITU G.992.5 (ADSL2plus)
• Supports splitterless ADSL implementation
• Supports Dying Gasp s

ATM SUBSYSTEM

• PPP over ATM (RFC 2364)
• Bridged IP over ATM (RFC 1483)
• PPP over Ethernet (RFC 2516)
• Multiprotocol Encapsulation over AAL5 (RFC 2684)
• Supports up to 8 Virtual Channel Connections (VCCs)
• Supports UBR, CBR, and VBR service classes
• ATM Forum UNI 3.1 / 4.0 PVC
• Support OAM F4/F5 look-back, AIS and RDI OAM cells

FEATURES

• IP Alias
• User Datagram Protocol (UDP)
• Transmission Control Protocol (TCP)
• Internet Control Message Protocol (ICMP)
• Internet Group Management Protocol (IGMP)
• PPP over PAP (RFC1334)
• PPP over CHAP (RFC1994)
• MIB II support (RFC1213)
• Transparent bridging as specified in IEEE 802.1D
• NAT (Network Address Translation)
• Dynamic Host Configuration Protocol (DHCP)
• Dynamic DNS support
• Routing Information Protocol (RIP) v1 and v2

MANAGEMENT

• TFTP client and server
• DHCP client and server
• FTP server and client
• Universal Plug and Play (UPnP) support
• Web-based Graphical User Interface (GUI) enabling end-user device configuration via HTTP
• Update of boot image or configuration data via TFTP / FTP
• Syslog
• Built-in Diagnostic Tools
• SNMP MIB support    

WIRELESS 802.11g

• Compliant 802.11g and 802.11b
• 2.4 GHz – 2.48GHz frequency range
• Supports 64 / 128 bits WEP and WPA
• 54 Mbps wireless operation rate
• Supports Quality of Service (QoS) – 802.11e

ETHERNET INTERFACE

• IEEE 802.3
• 10/100 Mbps
• Ethernet interface supporting up to 64 LAN hosts