HiRO H50187 DSL ADSL DSL2+ ADSL2+ Modem 4 Port LAN Router Verizon AT&T SBC Yahoo!! ALL Major US ADSL ISP Compatible

HiRO H50187 DSL ADSL DSL2+ ADSL2+ Modem 4 Port LAN Router Verizon AT&T SBC Yahoo!! ALL Major US ADSL ISP Compatible

ANSI T1.413 Issue 2, ITU-T G.992.1 (G.dmt), ITU-T G.992.2 (G.lite), ITU-T G.992.3 (G.dmt.bis/ADSL2), and ITU-T G.992.5 (ADSL2plus) specification. Both Annex A (ADSL over POTS) and Annex B (ADSL over ISDN) are supported.


Features & Benefits:
    - Support up to 24 Mbps downstream and 1.5 Mbps upstream,
    -Compatible with AT&T, Verizon, SBC Yahoo!! and all major DSL ISP, Tested and Verified,
    -Compatible with latest ADSL standards, Including DSL, ADSL, DSL2+, ADSL2+,
    - Firewall secure routing functionality gives user a safer and cleaner internet environment.
ADSL COMPLIANCE
    - Full-rate ANSI T1.413 Issue 2
    - ITU G.992.1 (G.dmt) Annex A or B
    - Splitterless ITU G.992.2 (G.lite) specification
    - ITU G.994.1 (G.hs)
    - ITU G.992.3 (G.dmt.bis / ADSL2)
    - ITU G.992.5 (ADSL2plus)
    - Supports splitterless ADSL implementation
    - Supports Dying Gasp s
    - ATM SUBSYSTEM
    - PPP over ATM (RFC 2364)
    - Bridged IP over ATM (RFC 1483)
    - PPP over Ethernet (RFC 2516)
    - Multiprotocol Encapsulation over AAL5 (RFC 2684)
    - Supports up to 8 Virtual Channel Connections (VCCs)
    - Supports UBR, CBR, and VBR service classes
    - ATM Forum UNI 3.1 / 4.0 PVC
    - Support OAM F4/F5 look-back, AIS and RDI OAM cells

FEATURES
    - IP Alias
    - User Datagram Protocol (UDP)
    - Transmission Control Protocol (TCP)
    - Internet Control Message Protocol (ICMP)
    - Internet Group Management Protocol (IGMP)
    - PPP over PAP (RFC1334)
    - PPP over CHAP (RFC1994)
    - MIB II support (RFC1213)
    - Transparent bridging as specified in IEEE 802.1D
    - NAT (Network Address Translation)
    - Dynamic Host Configuration Protocol (DHCP)
    - Dynamic DNS support
    - Routing Information Protocol (RIP) v1 and v2

MANAGEMENT
    - TFTP client and server
    - DHCP client and server
    - FTP server and client
    - Universal Plug and Play (UPnP) support
    - Web-based Graphical User Interface (GUI) enabling end-user device configuration via HTTP
    - Update of boot image or configuration data via TFTP / FTP
    - Syslog
    - Built-in Diagnostic Tools
    - SNMP MIB support

ETHERNET INTERFACE
    - IEEE 802.3
    - 10/100 Mbps
    - Ethernet interface supporting up to 64 LAN hosts

USB SLAVE INTERFACE (optional)
    - 1.1 slave interface
    - Compatible with 2.0 root hubs
    - Simultaneous operation with Ethernet interface
    - Driver for WIN 98 / 2000 / ME / XP / Vista/7/8